Product Information

Here’s what’s included:

• Net-Trol Wood Cleaner
• Deks Olje D1 Feeding Oil
• Sandpaper - 80 and 120-grit
• Stiff cleaning brush
• Application brush
• Gloves
• Methylated Spirit

Net-Trol

Net-Trol can be used on all our unpainted range as a cleaning product. It restores weathered wood to its natural colour without affecting the fibres—gently removing dirt that naturally becomes ingrained over time.

Useful Links: 

• Net-Trol product information

Deks Olje D1 Feeding Oil

Clean weathered wood with Net-Trol to remove the loose wood fibres, dirt and other surface contaminants. Wait for 2-3 good drying days before applying the wood oil. Deks Olje D1 also provides protection against humidity and UV ray damage. This product is orinigally manufactured through Owatrol Direct.

Useful Links: 

• Deks Olje D1 Technical Data Sheet

Directions for Use

How to use Net-Rol Wood Cleaner

1. First wet the surface with fresh, clean water

2. Apply Net-Trol with the application brush included in your kit

3. Scrub the surface with the stiff brush included in your kit

4. Leave to stand for approx 10-20 minutes. If the surface starts to dry, dampen with a mist application of water

5. Scrub the surface whilst rinsing with water

6. If required, repeat procedure

7. Allow to dry for 48 hours or until it meets the moisture content required by the chosen finish

8. Begin the sanding process with the 80-grit then move on to the 120-grit to get below the most weathered timber (a thorough

sanding with both grits is important to get a quality finish)—before moving onto the wood-saturating oil application.

Clean Up

Clean all tools used with methylated spirit

Things to Remember

• Shake container thoroughly before use
• Cover any areas you want to protect
• Thoroughly wet surrounding plants and shrubs
• Apply between 5˚C and 35˚C
• Do not apply on a hot surface as the product will dry too quickly
• If cleaning vertical wood, work from bottom to top to avoid streaking 

Deks Olje D1 Feeding Oil

Deks Olje’s success comes from saturating the wood to create an even finish. Apply Deks Olje D1 twice and continue “wet-on-wet” until saturation is reached. Don’t let it dry between applications. Keep applying as much D1 as possible on the first day. Keep it active by continual brushing. After the final application, wait 30 minutes, then wipe with a soaked rag to aid saturation and collect drips. Allow ample space, as it’s a messy job, and give it a few days to dry.

Things to Remember

• Cover everything you do not wish to paint
• Apply between 5˚C and 35˚C
• Do not apply in direct sunlight or on hot surfaces
• After initial application, always back-brush to improve penetration and uniformity of coverage

Keep out of the reach of children and away from pets before, during and directly after application. See the product safety advice for more information.